Device Maintenance; Safety Precautions And General Information; General Safety Warnings And Cautions - Hillrom A-90015 Gebrauchsanleitung

INSTRUCTIONS FOR USE

Device Maintenance:

Make sure that all labels are installed and can be read. Replace labels as necessary
by using a plastic scraper to remove the label. Use an alcohol wipe to remove any
adhesive residue.
Contact Allen Medical Systems, Inc. if you need to repair or replace the device
contact us using the information from the contact details section (1.3).
4

Safety Precautions and General Information:

General Safety Warnings and Cautions:

WARNING:
a. Do not use if product shows visible damage.
b. Prior to using this device, please read the instructions for equipment set up and
use. Familiarize yourself with the product before application on a patient.
c. To prevent patient and/or user injury and/or equipment damage, examine the
device and surgical-table side rails for potential damage or wear prior to use. Do
not use the device if damage is visible, if parts are missing or if it does not function
as expected.
d. To prevent patient and/or user injury and/or equipment damage, examine the
device and surgical-table side rails for potential damage or wear prior to use. Do
not use the device if damage is visible, if parts are missing or if it does not function
as expected.
e. To prevent patient and/or user injury and/or equipment damage, verify the
device attaching clamps completely touch the table-side rails and are firmly in
place. Apply device only to U.S. standard side rails. Test the locking mechanism to
ensure no movement when elevated or pushed.
CAUTION:
a. Do not exceed safe working load shown in the product specification table
b. To prevent patient and/or user injury and /or equipment damage: all
modifications, upgrades, or repairs must be performed by an Allen authorized
specialist. Failure to comply may void warranty.
c. Do not raise or lower the shoulder chair when the safety strap is attached.
Document Number: 80028159
Version C
Page 14
Issue Date: 30 MAR 2020
Ref Blank Template: 80025117 Ver. F