Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
if the instructions in the manual are not
obeyed.
CAUTION:
damage to the product, other materials or
the adjacent area if the instructions in the
manual are not obeyed.
Note:
Used to give more information that is necessary
in a given situation.
General safety instructions
WARNING:
instructions that follow before you use the
product.
•
This product is a dangerous tool if you are not
careful or if you use the product incorrectly. This
product can cause serious injury or death to the
operator or others. Before you use the product,
you must read and understand the contents of this
operator's manual.
•
This product is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge.
•
Save all warnings and instructions.
•
Comply with all applicable laws and regulations.
•
The operator and the employer of the operator must
know and prevent the risks during operation of the
product.
•
Do not let a person operate the product unless they
read and understand the contents of the operator's
manual.
•
Do not operate the product unless you receive
training before use. Make sure that all operators
receive training.
•
Do not let a child operate the product.
•
Only let approved persons operate the product.
•
The operator is responsible for accidents that occur
to other persons or their property.
•
Do not use the product if you are tired, ill, or under
the influence of alcohol, drugs or medicine.
•
Always be careful and use your common sense.
•
Keep the product clean. Make sure that you can
clearly read signs and decals.
•
Do not use the product if it is damaged or does not
operate correctly.
•
Do not do modifications to this product.
•
Do not operate the product if it is possible that other
persons have done modifications to the product.
2124 - 001 - 13.04.2023
Used if there is a risk of
Read the warning
Safety instructions for operation
WARNING:
instructions that follow before you use the
product.
•
Use personal protective equipment. Refer to
Personal protective equipment on page 6 .
•
Overexposure to vibration can cause circulatory
damage or nerve damage to persons with decreased
blood circulation. Get medical aid if you have
symptoms of overexposure to vibration. These
symptoms include numbness, loss of feeling,
tingling, pricking, pain, loss of strength, changes
in skin color or condition. These symptoms usually
show in the fingers, hands or wrists.
•
Do not operate the product without all protective
covers installed.
•
Make sure that you know how to stop the motor
quickly in an emergency.
•
Before you go away from the product, stop the motor
and disconnect the power cord. Make sure that there
is no risk of accidental start.
•
Make sure that clothing, long hair and jewelry do not
get caught in moving parts
•
Make sure that you are in a safe and stable position
during operation.
•
Make sure that there are no loose bolts and nuts.
•
Do not lift or tilt the blasthead during operation.
Abrasive comes out of the product at high speed and
can cause injury. Always disconnect the power plug
before you lift or tilt the product.
•
Make sure that the separator and separator tray are
closed during operation.
•
Do not operate the product unless you can get aid if
an accident occurs.
•
Always use approved accessories. Speak to your
Husqvarna dealer for more information.
•
If vibrations occur in the product or the noise level
from the product is unusually high, stop the product
immediately. Disconnect the power plug. Examine
the product for damages. Repair damages or let an
approved service agent do the repair.
•
Always connect the product to a dust extractor for
removal of the dust.
•
Do not pull the hose of the dust extractor. The
product can fall and cause injury or damage.
•
Keep the dust extractor on until the motor stops fully.
•
Only operate the product from behind with your hand
on the handlebar.
•
Make sure that there is no grease or oil on the
handles.
•
Make sure that the the brush list seals are not
damaged.
•
Make sure that the the brush list seals are installed
in the correct height.
Read the warning
5
Werbung
Inhaltsverzeichnis
Fehlerbehebung
