Initial Commissioning; Disinfecting, Cleaning And Care; Limitations And Restrictions On Cleaning, Disinfection, And Sterilization - KLS Martin group microStop Gebrauchsanweisung

REF
55-864-14-04
55-864-15-04
55-864-16-04
55-864-17-04
55-864-18-04
55-864-19-04
55-009-02-04
55-996-76-04
55-996-77-04
55-009-06-04
55-009-08-04
55-443-05-04
Only original parts approved by Gebrüder Martin may be used for repairs.
4.2

Initial Commissioning

The container must be thoroughly cleaned before loading it for the first sterilization cycle, see section 5
"Disinfecting, Cleaning and Care", page 32. The container cover (5) must not come into contact with
acetone/petroleum ether.
To assemble the container, follow the instructions in section 4.1 "Description of the components", page 30.
Then carry out a functional check in accordance with section 6.1 "Functional Check before Loading",
page 35.
5

Disinfecting, Cleaning and Care

5.1

Limitations and restrictions on cleaning, disinfection, and sterilization

The parameters for cleaning and disinfecting the container are to be determined by the operator/user, e.g.
as part of the hygiene plan. The treatment agents must be compatible with the container component
materials and their hygienic and microbiological effectiveness must be guaranteed. A thorough final rinse,
must ensure that no cleaning and care agent residues are left on any of the components of the container.
32
Designation
Logistics frame, green
Logistics frame, yellow
Logistics frame, violet
Logistics frame, orange
Logistics frame, gray
Logistics frame, light-blue
Label, MiniSet, with indicator, 1,000 pcs.
Seal, MiniSet, no indicator, 1,000 pcs.
Seal, MiniSet, with indicator, 1,000 pcs.
Spring frame for MiniSet sterile container
Silicone mat for MiniSet container
Release aid, MS disk
Instructions for Use
microStop® – MiniSet Container System
Revision 04