Safety Instructions - Scheppach HSM3500 Original Bedienungsanleitung

• Observe all safety- and danger instructions on the
machine.
• Keep all safety and danger instructions near the
machine in complete and readable form.
• The machine with the offered tool and accessories
is exclusively designed for the cutting of tile and
concrete blocks with a cutting height of up to 110
mm. The cutting of metal and wood is not permitted.
• The dimensions of the workpieces to be machined
should not exceed or fall below the specified maxi-
mum and minimum dimensions.
• Please use the machine only if it is in a technically
fault-free condition. Use It properly, conscious of
the involved safety and risk factors and giving due
consideration to the operating instructions manual!
Faults, especially those that can affect safety must
be rectified immediately!
• The safety-, workplace- and maintenance specifica-
tions of the manufacturer as well as the dimensions
specified in the technical data must be observed.
• The applicable accident prevention measures and
the other generally recognized technical safety
rules must be observed.
• The machine must be used, serviced or repaired on-
ly by persons who are familiar with it and who have
been briefed about its risks. Arbitrary alterations to
the machine will make the liability of the manufac-
turer for damages resulting there from null and void.
• The machine may be used only with original acces-
sories and original tools of the manufacturer.
Despite proper use, certain residual risk factors can-
not be eliminated fully. The following things can occur,
depending on the design and structure of the machine:
• Intervention in the running diamond cutting disc.
• Contact with the diamond cutting disc in exposed
area.
• Ejection of work pieces and work piece compo-
nents.
• Ejection of a faulty diamond attachment in the cut-
ting disc.
• Hearing damage due to non-use of the required
hearing protection.
• Injuries to the eyes due to non-use of eye protection
Any use beyond the one specified will be treated as
improper. The manufacturer will not be liable for dam-
ages resulting from such improper use; the risk will be
borne by the user alone.
Please note that our equipment has not been designed
for use in commercial, trade or industrial applications.
Our warranty will be voided if the equipment is used
in commercial, trade or industrial businesses or for
equivalent purposes.

5. Safety instructions

Working with the stone and tile cutter can be risky, if
safe and correct work procedures are not followed. As
with all machines, working with the product involves
certain inherent risks. Working at the machine with
respect and caution reduces the risk of physical inju-
ry considerably. Not observing the customary safety
measures can lead to physical injuries to the opera-
tors. Safety equipment such as protective goggles,
dust masks and ear protection can reduce the risks of
possible injury. Even the best possible protection how-
ever, cannot match incorrect assessment, careless-
ness or negligence. Always use your healthy common
sense and caution in the workshop. If you feel an op-
eration is risky, do not try it out. Think about an alter-
native method which feels safer. Think of the following:
Your physical integrity is your personal responsibility.
This machine was designed to perform certain jobs.
We recommend urgently that the machine should not
be altered and it should not be used for application ar-
eas for which it was not designed. If you are not sure,
please ask your dealer before working with the prod-
uct.
Warning: Non-observation of these specifications can
lead to serious injuries.
Warning! When using electric tools, basic safety pre-
cautions should always be followed to reduce the risk
of fire, electric shock and personal injury, including the
following. Read all these instructions before attempt-
ing to operate this product and safe these instructions.
1. Keep work area clean
Cluttered areas and benches invite injuries.
2. Consider work area environment
Don't expose power tools to rain. Don't use pow-
er tools in damp or wet locations. Keep work area
well lit. Don't use power tools in presence of flam-
mable liquids or gases.
3. Guard against electric shock
Prevent body contact with grounded surfaces (e.g.
pipes, radiators, ranges refrigeratiors).
www.scheppach.com GB | 27