MonoControl CS_T
2.2
Proper use
This product is only suitable for the specified intended use� Any
other use, or use that extends beyond this, will be deemed improper
and will result in warranty claims lapsing and precludes any liability
claims�
The MonoControl CS T gas pressure regulator is a safety gas pressure
regulator according to EN 16129 for operation with liquid gas in the
gas phase�
The MonoControl CS T gas pressure regulator is exclusively provided
and approved for use and operation in conjunction with a permanent-
ly installed liquid tank� The kit may be installed only in an LP gas tank
installation in accordance with EN 1949�
When the appliance is used commercially, the user must ensure that
special legal and insurance regulations that apply in the respective
destination country are observed (in Germany e�g� DGUV regulations)�
The gas pressure regulator may only be operated
within the technical specifications (see chapter „Technical data"),
•
in a protected environment that is not exposed to moisture,
•
sunlight or dust,
if it was installed in accordance with the installation instructions,
•
if it was checked by a liquid gas expert,
•
taking into consideration national provisions and regulations on
•
operating and testing gas installations (e�g� DVGW Work Sheet
G 607 in Germany),
using Truma original spare parts and accessories�
•
50020-00976 ∙ 00 ∙ 08/2022
Safety
EN
31