Truma MonoControl CS T Gebrauchsanleitung Seite 28

Safety
Avoid using external undue force on the gas pressure regulator,

since this may lead to malfunctions�
Do not impede the reset button's movement using objects�

2.1.2 Component installation and connection
Component connections may be leaky if they are incorrectly installed,
damaged or dirty�
Securely fasten all parts to stable structures to prevent damage

due to vehicle vibrations while driving�
Keep connections free from dirt�

2.1.3 Handling liquid gas
The use of upright gas cylinders from which gas is extracted in the
gas phase is mandatory when operating the gas pressure regulator�
If a gas cylinder is on its side, liquid can penetrate low-pressure
parts, damage sensitive parts and lead to dangerous gas leaks� Gas
cylinders from which gas is taken in the liquid phase (e�g� for fork
lifts) must not be used, since they would result in damage to the gas
system�
Only use gas cylinders in an upright position�

Do not use gas tanks that provide gas from the liquid phase�

The use of gas tanks that are more than 80% full may lead to the
liquid phase penetrating low-pressure parts, damaging sensitive parts
and causing dangerous gas to leak�
Do not fill gas tanks more than 80%�

If you can smell gas or there are leaks in the gas system:
Do not switch on electrical appliances or other ignition sources�

Close the cylinder valve�

Have an expert check and repair the gas system immediately�

Do not open the cylinder valve anymore in the meantime�

28 EN
MonoControl CS_T
50020-00976 ∙ 00 ∙ 08/2022