Voltage And Current Monitoring - Balluff BIR 01 K12LL3-000S04 Serie Konfigurationsanleitung

BIR 01-_ _ _ _-K1_ _ L_... / BIR 02-_ _ _ _-P1 _ _ L _...
Inductive Rapid Positioning System
5
Secondary Device Functions (continued)
5.6

Voltage and Current Monitoring

5.6.1 Description
The voltage and current module sends messages about
over-current, short-circuit, wire breakage, over-voltage and
under-voltage. Over-voltage and under-voltage detection
starts a timer. If the timer has expired and the voltage level
has not returned to the normal operating voltage threshold,
the module sends out the messages.
The messages include device status, IO-Link events,
process data and LED signaling.
5.6.2 Mathematics/Algorithm
SIO mode: Undervoltage
In SIO mode two thresholds apply for the undervoltage:
11 V and 9 V.
11 V applies for the following device variants:
– BIR 01-_ _ _ _-K12LL3-000S04
– BIR 02-_ _ _ _-P12LL3-000S04
9 V applies for the following device variants:
– BIR 01-_ _ _ _-K15AL_-000S92
– BIR 01-_ _ _ _-K15SL_-000S15
– BIR 02-_ _ _ _-P15AL_-000S92
SIO mode: Overvoltage
In SIO mode the threshold for overvoltage is 33 V. This
threshold applies to all device variants.
IO-Link mode
If the device is in IO-Link operation, the undervoltage state
occurs at 17 V and at 33 V for overvoltage.
5.6.3 Process Data
Object ID Name
0x0017 (23) Undervoltage
0x0018 (24) Overvoltage
Tab. 5-26: Voltage and current monitoring – Process data
Also see chapter Process Data Profiles on page 9.
5.6.4 ISDU
Name
Voltage Monitoring Detection
Time Duration
Tab. 5-27: Voltage and current monitoring – ISDU
44 english
Description
TRUE = the voltage level is below the threshold value.
TRUE = the voltage level is above the threshold value.
Index Subindex Access
0x2200 0 R/W
(8704)
Length Data Type Data Storage
2 bytes UINT16
Direction
Input
Input
Default
yes 10