Balluff BOS R254K-UUI-LE10-S4 Konfigurationsanleitung Seite 163

BOS R254K-UUI-LE10-S4
Photoelectric Sensors
6
Secondary Device Functions (continued)
Signal Delay Input
With Signal Delay Input, the internal binary signal source
can be selected. Input contains a list of the internal binary
signals.
Value Meaning
0x0002 (2) Digital Input Pin 2
0x0003 (3) Switching Counter Limit not reached
0x0004 (4) Switching Counter Limit reached
0x0005 (5) Switching Counter Limit exceeded
0x0007 (7) Switching Counter Reset
0x0008 (8) Signal Delay Channel 1
0x0009 (9) Signal Delay Channel 2
0x000A (10) Signal Delay Channel 3
0x000B (11) Signal Delay Channel 4
0x0010 (16) Switching Speed ok
0x0011 (17) Switching Speed too low
0x0012 (18) Switching Speed too high
0x0014 (20) Switching Speed Reset
0x0015 (21) Short Circuit Pin 4
0x0016 (22) Short Circuit Pin 2
0x0017 (23) Undervoltage
0x0018 (24) Overvoltage
0x0021 (33) Signal Quality Bad
0x0023 (35) Humidity Bad
0x0027 (39) Transducer Enable
0x002E (46) Switching Threshold Adaption Alarm
0x002F (47) System Error
0x0034 (52) PDout Invalid
0x0037 (55) Inclination Alarm Status
0x0038 (56) ADSS1
0x003A (58) LSSC1
0x003B (59) LSSC2
0x003C (60) LSSC3
0x003D (61) LSSC4
0x003E (62) Teach-in
0x0041 (65) Lifetime Extreme
0x004B (75) Vibration Alarm Status
0x004E (78) Temperature Status Customer Limits
0x004F (79) Temperature Status
0x0063 (99) Logic block result 1
0x0064 (100) Logic block result 2
0x0065 (101) Logic block result 3
0x0066 (102) Logic block result 4
Tab. 6-6: Signal Delay Input
www.balluff.com
Signal Delay Mode
With Signal Delay Mode, the current mode of the signal
delay function can be selected.
Value Meaning Description
0x00 (0) Deactivated Deactivated
0x01 (1) Delay On, Off and On-/Off delay
function
0x02 (2) One-Shot One-Shot function
Tab. 6-7: Signal Delay – Signal Delay Mode
Signal Delay On-Delay
With Signal Delay On-Delay, the time for On-Delay can be
set. The value represents the time in milliseconds. The
value range is between 0x0000 (0) and 0xFFFF (65535). A
value of 0x0000 (0) represents no delay. The parameter
has no effect in One-Shot-Modus.
Signal Delay Off-Delay / One-Shot
With Signal Delay Off-Delay / One-Shot, the time for
Off-Delay and One-Shot can be set. The value represents
the time in milliseconds. The value range is between
0x0000 (0) and 0xFFFF (65535). A value of 0x0000 (0)
represents no delay.
Signal Delay Status
With Signal Delay Status, the current status of each
channel can be read.
Value Meaning Description
0x00 (0) Off Output signal of Signal Delay
= 0/FALSE
0x01 (1) On Output signal of Signal Delay
= 1/TRUE
0x02 (2) On-Delay Output signal of Signal Delay
= 0/FALSE and On-Delay
currently running.
0x03 (3) Off-Delay Output signal of Signal Delay
= 1/TRUE and OFF-Delay
currently running.
0x07 (7) One-Shot Output signal of Signal Delay
= 1/TRUE and One-Shot
function currently running.
0xFF (255) Deactivated Feature is deactivated.
Tab. 6-8: Signal Delay – Signal Delay Status
english 53