Troubleshooting - Walimex Pro NIOVA 80 Compact-Serie Gebrauchsanleitung

10. Troubleshooting

Problem
Unit is switched on,
but shows no function
Lamps
Do not light up
Remote control
Doesn't work
Possible causes
Mains cable is not plugged
in or not plugged in correctly
Mains cable is not plugged
in or not plugged in correctly
Luminaire is not
switched on
Only one battery inserted
(Niova 80)
Batteries are empty
Unit is switched off
Unit is defective
No batteries inserted
Batteries empty
Luminaire switched off by
mains switch
Incorrect channel selection
Unit is defective
Remedy
Connect the mains cable and
plugged in correctly
Connect power supply unit
Switch on the lamp with the
ON/OFF switch
Load both battery slots
Charge batteries
Switch on the unit
Please contact our service!
Repairs may only be carried out by
a qualified electrician be carried out
by a qualified electrician.
Insert batteries or rechargeable
batteries
Insert sufficiently charged batteries
or rechargeable batteries
Switch on the unit with the
ON/OFF switch
switch on
Make correct channel selection
Please contact our service!
Repairs may only be carried out by
a qualified electrician.
37