Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5.
Quick guide
NOTICE
Detailed instructions for the following activities can be found in the respective sections of these
operating instructions. When using the unit for the first time, follow the sequence of the following
steps to avoid damage to the unit.
WARNING
Please observe the safety instructions in the respective sections for all activities.
•
Use with the power supply unit.
•
Mount the unit on a tripod.
•
Connect the unit to the power supply.
•
Switch on the unit, switch off – dimming function.
6.
Preparing the unit for use
6.1 Mounting reflector
The Walimex pro Niova 80/120 Compact studio lights can be operated with or without reflector.
If no reflector is used, there is no bundling of the light cone and the lamp produces a very
wide, unconcentrated light beam. To achieve a greater luminous intensity even at greater
distances, we recommend the use of the reflector supplied. The connection of the luminaire
is Bowens-compatible and allows the installation of further accessories such as a softbox or
a reflector umbrella. We recommend installing the reflector on a tripod before mounting.
• Pull the locking/unlocking lever of the fastening adapter (11) backwards.
• Turn the protective cap (16) and remove it from the fastening adapter.
• Insert the reflector (17) into the reflector holder (10) and turn the reflector until it locks in
place.
• A click of the locking/unlocking lever of the fastening adapter (11) signals the correct locking
of the reflector.
• Check the secure fit of the reflector (17).
• The reflector is correctly mounted.
• Proceed in reverse order when dismantling the reflector.
Mounting reflector (fig. similar):
1. Slide the accessory
lock to the back.
2. Place the reflector in the accessory holder and
lock the reflector in place. lock the reflector in
place with a clockwise rotation.
29
Werbung
Inhaltsverzeichnis
