Built-In Memory; Synchronizing Additional Wireless Sensor(S) (Optional) - Bresser WSX3001000000 Bedienungsanleitung

power failure These include:
- Time & Date, Alarm Time, Max/Min & Past 24 hours weather records, Alert setting values,
Sensor(s) channel history, and Units
1 Remove the battery door of the console
2 Insert 3 new AAA batteries as per the polarity indicated,
3 Replace the battery door

BUILT-IN MEMORY

The console has built-in FLASH memory that holds the vital settings These include:
- Time Zone, DST status, Time SYNC status, WI-FI and Weather server setting, Latitude /
Longitude, Hemisphere setting, Calibration values, and Sensor ID of paired sensor(s)
RESET AND FACTORY HARD RESET
To reset the console and start again, press the [ RESET ] key once
To hard reset the console and resume factory settings, press and hold the [ RESET ] key for 6
seconds
RESYNCHRONIZE SENSORS
Press the [ SENSOR / WI-FI ] key once for the console to enter sensor Synchronization mode,
and the console will re-register all the sensors that have already been registered to it before
i e the console will not lose the connection of the sensors that you'd paired up before
CHANGING BATTERIES AND MANUAL PAIRING OF SENSOR
Whenever you changed the batteries of the wireless indoor or 7-in-1 weather sensor, re-
synchronization must be done manually
1 Change all the batteries to new ones in the sensor
2 Press [ SENSOR / WI-FI ] key on the console to enter sensor synchronization mode
3 Press [ RESET ] key on the wireless indoor or 7-in-1 weather sensor

SYNCHRONIZING ADDITIONAL WIRELESS SENSOR(S) (OPTIONAL)

The console can support up to 7 additional wireless sensors
1 Press the [ SENSOR / WI-FI ] key once on the console to enter synchronization mode
2 Press the [ RESET ] key on the new sensor, and wait for a few minutes for the new sensor
to paired to the console
NOTE:
- Channel number of the indoor sensor must not be duplicated among the sensors Please refer
to "INSTALL WIRELESS INDOOR SENSOR" for details
- This console can support different type of additional wireless sensor, e.g. soil moisture and
pool sensor If you would like to pair up additional sensors, please check with your retailer for
more detail
9