Control Elements; Product Description; Rotary Switch - VOLTCRAFT 2633261 Bedienungsanleitung

6. Controlelements
See fold-out page
1 LCD display
2 LOCK button for permanent insulation measurement
3 H OLD button to "freeze" the current display and MAX/MIN button to display min. and max. values
4 TEST button for insulation measurement

5 Rotary switch

6 LIGHT button to turn on the backlight and ZERO function
7 Attachment point (for holding strap etc.)
8 Fold-out tilt stand
9 Battery compartment
10 Red measuring socket "VΩ" (positive potential)
11 Black "COM" measuring socket for earth potential or negative potential

7. Product description

The measuring device shows measured values and the corresponding units and symbols on the digital display. The
display for measured values comprises 4000 counts (count = smallest display value). A bargraph shows rapid chang-
es in value.
The measuring device shuts down automatically if it is not operated for about 10 minutes. This saves battery power
and thus extends operating time. Battery voltage is displayed in the "750 V~" range, which helps estimate the remain-
ing operating time.
The measuring device can be used for do-it-yourself or for professional applications.
For better readability, the measuring device can be placed ideally using the tilt stand on the back.
Rotary switch (5)
The individual measuring functions are selected via the rotary switch. The auto-
matic range selection "auto range" is active in the "400 Ω" measuring function.
The appropriate measuring range is set automatically.
If the rotary switch is set to "OFF", the measuring device is switched off. Always
turn off the device when it is not in use.
29