Guide To Using This Manual; Applicable Documents; Warning Notices In Text; Symbols In Text - Stihl MSA 160.0 C Gebrauchsanleitung

2 Guide to Using this Manual

2 Guide to Using this Manual
2.1

Applicable documents

The local safety regulations apply.
► In addition to this User Manual, you should
also read, understand and retain the following
documents:
– User Manual for STIHL AR battery
– User Manual for "AP belt bag with connect‐
ing cable"
– Safety notices and precautions for
STIHL AP battery
– User Manual for STIHL AL 101, 301, 301-4,
500 chargers
– Safety information for STIHL batteries and
products with built-in battery:
www.stihl.com/safety-data-sheets
For further information on STIHL connected,
compatible products and FAQs, please visit
www.connect.stihl.com or available from a STIHL
servicing dealer.
®
The Bluetooth word mark and logos are regis‐
tered trademarks owned by Bluetooth SIG, Inc.
These word marks and logos are used by STIHL
under license.
Batteries with are equipped with a Bluetooth
radio interface. Local operating restrictions (in
aircraft or hospitals, for example) must be
observed.
2.2

Warning Notices in Text

DANGER
■ This notice refers to risks which result in seri‐
ous or fatal injury.
► Serious or fatal injuries can be avoided by
taking the precautions mentioned.
WARNING
■ This notice refers to risks which can result in
serious or fatal injury.
► Serious or fatal injuries can be avoided by
taking the precautions mentioned.
NOTICE
■ This notice refers to risks which can result in
damage to property.
► Damage to property can be avoided by tak‐
ing the precautions mentioned.
0458-024-9801-A
2.3

Symbols in Text

This symbol refers to a chapter in this
instruction manual.
3

Overview

3.1 Chainsaw, battery
1
8
7
10
20
19
18
®
1 Rear hand guard
The rear hand guard protects the right hand
against contact with the saw chain if the chain
breaks or comes off the bar.
2 Spiked bumper
The spiked bumper supports the chainsaw
against the wood while cutting.
3 Saw chain
The saw chain cuts the wood.
4 Guide bar
The guide bar supports and guides the saw
chain.
5 Tensioning gear
The tensioning gear moves the guide bar and
thus tensions and slackens the saw chain.
6 Chain sprocket
The chain sprocket drives the saw chain.
7 Chain sprocket cover
The chain sprocket cover covers the chain
sprocket and fastens the guide bar to the
chainsaw.
2
3
6
5
9 4
21
11
12
#
13
14
15
17
16
#
English
24
23
22
35