Remote Control - Waeco CoolAir SP-900 Bedienungsanleitung

BA_SP-900.book Seite 25 Montag, 14. April 2008 9:48 09
CoolAir SP-900
No. in2,
Meaning
page 3
9 Digital display for:
– selected operating mode
– Selected temperature in °C
7.3

Remote control

The following control elements are available on the remote control for oper-
ating the system:
No. in3,
Meaning
page 4
1 The STANDBY button
The system can be switched between active and standby modes.
2 Temperature - button:
The temperature - button decreases the temperature by 1 °C or
the timer running time by 10 minutes.
3 Temperature + button:
The temperature + button increases the temperature by 1 °C or
the timer running time by 10 minutes.
4 The Operating mode - button:
The operating mode - button switches to the next mode down.
5 The Operating mode + button:
The operating mode + button switches to the next mode up.
for mode 1
for mode 2
for mode 3
A
for automatic mode
000
for timer function
Operation
25