Set Date/Time - VANTRUE OnDash N4 Bedienungsanleitung

•
Speed Unit: Press
MP/H.
Press the
C. Files
Review and delete videos stored in the file folders.
•
Event: Critical event videos detected by G-Sensor activity or manually
locked by user.
•
Normal: Standard videos recorded.
•
All: All the standard videos and critical event videos recorded.

4.3 Set Date/Time

Open the menu interface, and navigate to "System Setup" > "Time &
Date" to enter the time setting menu. There are two ways to set the time
and date: Manual date/time setting and GPS automatic update(en-
abled by default).
--After the GPS automatic correction is turned on, the time and date will
be automatically changed according to the time zone you selected
after the GPS positioning is successful.
--Manually set date/time, you can manually adjust different times.
Note：
1. To manually set the date/time, you need to turn off the GPS automatic
time correction to set.
or and
button to exit and complete the setup.
Event
Normal
All
button to select either KM/H or
- 13 -