Date/Time Setting - VANTRUE OnDash N1 PRO Bedienungsanleitung

4.3 Date/Time setting

Go to the MENU interface, and "System Setup">"Time& Date", press
Down button to set. In the time setup interface, press UP or Down
button to select date and time value, press OK to confim and go to
next. When the setup is finished, press Power button to exit.
4.4 Auto LCD OFF
This feature avoids any chance of the screen being a distraction in the
vehicle, especially at night when the illumination from the LCD screen
can be a nuisance or even a hazard to the driver.If you choose 3 Min,
the camera's LCD will light off after 3 minutes but still recording with
blue light blinks. You can press any button to light on the screen.
- 13 -