Menu Settings - VANTRUE OnDash N4 Bedienungsanleitung

4.2 Menu Settings

After powering ON the camera, press the
process.
(If the camera is recording video, press the
before pressing the
A. Record Setup
Press the
to navigate the different options.
•
Resolution: Press the
and resolution.
Front+Cabin+Rear Mode: 1440P+1080P+1080P 30FPS; 1080P+1080P+1080P
30FPS; 1080P+1080P+720P 30FPS; 1440P+1440P+1080P 30FPS;
720P+720P+720P 30FPS.
Front+Cabin Mode: 1440P+1440P 30FPS; 1440P+1080P 30FPS; 1080P+1080P
30FPS; 1080P+720P 30FPS; 720P+1080P 30FPS; 720P+720P 30FPS.
Front+Rear Mode: 2160P+1080P 30FPS; 1440P+1080P 30FPS; 1080P+1080P
30FPS; 1080P+720P 30FPS; 720P+1080P 30FPS; 720P+720P 30FPS.
Single Front Cam Mode: 3840x2160P 30FPS; 2592x1520P 30FPS;
2560x1440P 30FPS; 1920x1080P 30FPS; 1280x720P 30FPS.
•
Loop Recording: Press
5Min, and OFF.
•
IR lEDs: Press the
button.)
button to enter the settings, and use the
or
button to change the duration: 1Min, 3Min,
and
button to enter the setup
button to toggle the recording mode
or button to select the section: Auto,
- 10 -
button to stop recording
or buttons