Connecting The Lamp To The Power Supply; Setting The Time And Date; Operation; Switching The Lamp On Or Off - LIVARNO home 367070 2101 Bedienungs- Und Sicherheitshinweise

Connecting the lamp to the
power supply
1. Insert the coaxial connector of the connection
cable into the connection socket
10
lamp.
2. Insert the USB plug of the connection cable into
the port of the mains adapter.
11
3. Plug the mains adapter
stalled socket to connect the lamp to the mains.

Setting the time and date

NOTE: If no buttons are pressed for more than 60
seconds whilst setting the time or date, the process
will be cancelled and any settings lost.
NOTE: When adjusting the settings in time mode,
the
symbol will continuously flash in the function
display.
1. If applicable, press the Mode button
switch from alarm mode to time mode. A beep
will sound and the
the function display
2. Press the Select button
A beep will sound and the top line in the time
display will flash.
15
3. Use the / button
4. Press the Select button
A beep will sound and the bottom line in the
time display will flash.
5. Use the / button
6. Press the Select button
A beep will sound and both lines in the display
will flash.
7. Use the / button
The weekday in the date display
automatically.
8. Press the Select button
A beep will sound and the first field in the date
display will flash.
9. Use the / button
10. Press the Select button
A beep will sound and the second field in the
date display will flash.
11. Use the / button
20 GB/IE
367070_2101_V2.0_livh_LED-Tischleuchte_Content_OS.indd 20
of the
7
into a properly in-
12
to
4
symbol will appear in
.
14
:
5
to set the current hour.
6
to confirm the setting.
5
to set the current minute.
6
to confirm the setting.
5
to set the current year.
6
will correct
16
to confirm the setting.
5
to set the current month.
6
to confirm the entry.
5
to set the current date.
6
12. Press the Select button
The date and time have been set.
The symbol in the function display will stop
flashing and stay on.
Note: You can change the unit of temperature
(° C or ° F) at any time by pressing the
ton .
6
You can switch between the 12-hour and
24-hour mode at any time by pressing the
button .
6

Operation

Use the flexible lamp head
LED lamp.
Switching the lamp on or off
The lamp has three brightness settings:
1. Touch the touch switch
on the LED lamp .
1
2. Touch the touch switch
to increase the brightness.
3. Touch the touch switch
increase the brightness more.
4. Touch the touch switch
switch the LED lamp
1
Switching the alarm on and off
Activate the alarm (see "Activating the alarm").
The alarm will sound at the set time.
Press any button ( ,
4
of the lamp to switch off the alarm sound.
With the snooze function activated, the
symbol will appear in the function display. The
alarm will sound again after the set snooze
time (max. 2 x).

Activating the alarm

Press the Mode button
mode to alarm mode. A beep will sound and the
to confirm the entry.
5
but-
to adjust the
2
once to switch
8
a second time
8
a third time to
8
a fourth time to
8
off.
, ) on the backside
5 6
to switch from time
4
06.07.21 12:09