Qos Engine - D-Link DIR-635 Benutzerhandbuch

Section 3 - Configuration
The QoS Engine option helps improve your network gaming performance by prioritizing applications. By default the
Enable This option is disabled by default. Enable this
StreamEngine: option for better performance and experience with
online games and other interactive applications,
such as VoIP.
Dynamic This option should be enabled when you have a
Fragmentation: slow Internet uplink. It helps to reduce the impact
that large low priority network packets can have
on more urgent ones.
Automatic Uplink This option is enabled by default when the QoS
Speed: Engine option is enabled. This option will allow
your router to automatically determine the uplink
speed of your Internet connection.
Measured Uplink This displays the detected uplink speed.
Speed:
Manual Uplink The speed at which data can be transferred from the router to your ISP. This is determined by your ISP. ISP's often speed
Speed:
test your uplink speed with a service such as www.dslreports.com.
Connection Type: By default, the router automatically determines whether the underlying connection is an xDSL/Frame-relay network or some
other connection type (such as cable modem or Ethernet), and it displays the result as Detected xDSL or Frame Relay Network.
"Static" or "DHCP" in the Internet settings, setting this option to xDSL or Other Frame Relay Network ensures that the router
Frame Relay Network causes the measured uplink speed to be reported slightly lower than before on such connections, but
gives much better results.
Detected xDSL: When Connection Type is set to automatic, the automatically detected connection type is displayed here.
D-Link DIR-635 User Manual

QoS Engine

34