Pptp - D-Link DIR-635 Benutzerhandbuch

Section 3 - Configuration
Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with
a username and password. This option is typically used for DSL services.
Address Mode: Select Static if your ISP assigned you the IP address,
subnet mask, gateway, and DNS server addresses. In
most cases, select Dynamic.
PPTP IP Address: Enter the IP address (Static PPTP only).
Enter the Primary and Secondary DNS Server Addresses
PPTP Subnet
Mask: (Static PPTP only).
PPTP Gateway: Enter the Gateway IP Address provided by your ISP.
Enter the Server IP provided by your ISP (optional).
PPTP Server IP:
Enter your PPTP username.
Username:
Password: Enter your PPTP password and then retype the password
in the next box.
Reconnect Mode: Select either Always-on, On-Demand, or Manual.
Maximum Idle Enter a maximum idle time during which the Internet
connection is maintained during inactivity. To disable this
Time:
feature, enable Auto-reconnect.
The DNS server information will be supplied by your ISP
DNS Servers:
(Internet Service Provider.)
D-Link DIR-635 User Manual
Internet Setup

PPTP

19