Wireless Settings - D-Link DIR-635 Benutzerhandbuch

Section 3 - Configuration
Check the box to enable the wireless function. If you do not
Enable Wireless:
want to use wireless, uncheck the box to disable all the wireless
functions.
Wireless Network
Name: Create a name using up to 32 characters. The SSID is case-
sensitive.
Enable Auto The Auto Channel Scan setting can be selected to allow
the DIR-635 to choose the channel with the least amount of
Channel Scan:
interference.
Wireless Channel: Indicates the channel setting for the DIR-635. By default the
channel setting for an existing wireless network or to customize
the wireless network. If you enable Auto Channel Scan, this
option will be greyed out.
802.11 Mode: Select one of the following:
802.11g.
802.11b Only - Select if all of your wireless clients are 802.11b.
802.11n Only - Select only if all of your wireless clients are 802.11n.
Channel Width:
Select the Channel Width:
40MHz - Select if you are using all 802.11n devices for maximum performance.
Auto 20/40 - This is the default setting. Select if you are using both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients.
Transmission Rate:
Select the transmit rate. It is strongly suggested to select Best (Auto) for best performance.
D-Link DIR-635 User Manual

Wireless Settings

- Select if all of your wireless clients are
- Select if you are using both 802.11b and 802.11g wireless clients.
- Select if you are using a mix of 802.11n, 11g, and 11b wireless clients.
25