Safety; Overview Of The Control Elements - Optimum OPTiturn TH 3309 Betriebsanleitung

4.2

Safety

Commission the lathe only under the following conditions:
The lathe is in proper working order.

The lathe is used as prescribed.

Follow the operating instructions.

All safety devices are installed and activated.

Eliminate or have all malfunctions rectified promptly. Stop the lathe immediately in the event of
any abnormality in operation and make sure it cannot be started-up accidentally or without
authorisation.
Notify the person responsible immediately of any modification.

For your own safety during operation on page 87
4.2.1

Overview of the control elements

lockable main switch
1
2
V-belt levels
Control panel on headstock
Version 1.1.0 - 2020-08-06
Selector lever gearbox - speed setting
Feed adjustment selector switch
Bed slide
Translation of original instruction
TH3309 | TH3309D EN
103