Intended Use - Optimum OPTiturn TH 3309 Betriebsanleitung

Warning: automatic start-
up!
Switching on forbidden!
Read the operating
instructions before
commissioning!
Wear a protective suit!
Contact address
1.3

Intended use

WARNING!
Improper use of the lathe will result in
will endanger personnel,

will endanger the lathe and other material property of the operator,

the correct function of the lathe may be affected.

The lathe is designed and manufactured for longitudinal and straight turning of round and regu-
lar formed
workpieces in cold metal, their diameter and weight are within the limits of the given specifica-
tions. The lathe must only be installed and operated in a dry and ventilated place.
The lathe is designed and manufactured to be used in environments where there is no poten-
tial danger of explosion.
If the lathe is used in any way other than described above, or modified without the approval of
Maschinen Germany GmbH, then the lathe is being used improperly.
We will not be held liable for any damages resulting from any operation which is not in accord-
ance with the intended use.
We expressly point out that the guarantee or CE conformity will expire, if any constructive, tech-
nical or procedural changes are not performed by the company Optimum Maschinen Germany
GmbH.
EN
TH3309 | TH3309D
78
Warning: tilting danger!
Do not climb onto the
machine!
Wear protective glasses!
Use ear protection!
Translation of original instruction
Warning: suspended loads!
Do not clean with
compressed air!
Wear protective gloves!
Only switch when stopped!
Caution, danger of
explosive substances!
Wear safety shoes!
Protect the environment!
Version 1.1.0 - 2020-08-06