Control Elements; Switching The Machine On; Switching The Machine Off - Optimum OPTiturn TH 3309 Betriebsanleitung

4.2.2

Control elements

Crossfeed / Longitudinal feed
Metric thread
[ mm / spindle revolution ]
Feed direction
Check filling level
Read the maintenance manual

Check up, inspection and maintenance on page 127
4.3

Switching the machine on


Switch on the main switch.
The control lamp for operation must be on.


Check that the EMERGENCY-STOP button is not pressed or is unlocked.
GENCY-STOP mushroom switch to the right in order to unlock it.

Close the lathe chuck protection.

Malfunctions on page 135
4.4

Switching the machine off


Switch off the main switch.

If the lathe has been shut off for a longer period of time, switch it off using the main switch
and secure it against being unintentionally switched back on.
ing the lathe on page 88
EN
TH3309 | TH3309D
104 Translation of original instruction
Inch thread
[ threads / inch ]
mm per spindle revolution
Refill oil
Turning direction
Direct run, momentary switch
Turn the EMER-

Disconnecting and secur-
Version 1.1.0 - 2020-08-06