Safety; Rating Plate - Optimum Optiturn TU 2506VB Betriebsanleitung

1

Safety

Glossary of symbols
provides further instructions


calls on you to act
listings

This part of the operating instructions
explains the meaning and use of the warning notes included in these operating instructions,

defines the intended use of the lathe,

defines the target group of the lathe,

points out the dangers that might arise for you or others if these instructions are not

observed,
informs you about how to avoid dangers.

In addition to these operating instructions, please observe
the applicable laws and regulations,

the statutory provisions for accident prevention,

the prohibition, warning and mandatory signs as well as the warning notes on the lathe.

European standards must be observed during the installation, operation, maintenance and
repair of the lathe.
If European standards have not yet been incorporated in the national legislation of the country
of destination, the specific applicable regulations of each country must be observed.
If applicable, necessary measures must be taken to comply with the country-specific regula-
tions before commissioning the lathe.
Always keep this documentation close to the lathe.
If you would like to order another operating manual for your machine, please indicate the serial
number of your machine. The serial number is located on the type plate.
1.1

Rating plate

DE Drehmaschine
EN Lathe
FR Tour
ES Torno
TU 2506VB
IT Tornio
CS Soustruh
DA Drehbænk
EL Tόρνος
NO
FI Kärkisorvi
HU Esztergapad
NL Draaibank
PL Tokarka
PT Torno
RO Strung
RU Токарный станок
SK Sústruh
SL Stružnica
SV Svarv
TR Torna Tezgahı
www.optimum-maschinen.de
INFORMATION
If you are unable to rectify an issue using these operating instructions, please contact us for
advice:
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
D- 96103 Hallstadt, Germany
Email: info@optimum-maschinen.de
Safety
Version 1.0 - 2020-12-22
Optimum Maschinen
Germany GmbH
Dr.-Robert-Pfl eger-Str. 26
96103 Hallstadt / Deutschland
3425010 138 kg
Netto
1.1 KW
SN
230 V ~50 Hz
Year
2500 min. -1
Translation of original instruction
TU2506VB EN
87