Figure 2: Mounting And Dimensions Of Dissolved Ozone Sensors; Dissolved Ozone Sensors - Mettler Toledo thornton Bedienungsanleitung

22
Notes:
1. Dimensions in parenthesis are millimeters.
2. Sensor / Flow housing assembly must be in upright position as shown.
3. Allow approximately 10 in. (254 mm) clearance to remove sensor.
4. Earth ground connection (refer to manual for wiring instructions).
Figure 2: Mounting and Dimensions of Dissolved Ozone
Sensors
pureO
3
Dissolved Ozone Sensor
Stainless Steel Flow Housing
Polycarbonate Flow Housing
pureO Dissolved Ozone Sensor
3
© 07 / 16 Mettler-Toledo GmbH
Printed in Switzerland