Operation And Handing; Operating Elements And Displays; Rating Plate; Cleaning And Maintenance - CASO DESIGN WineCase 6 Original Bedienungsanleitung

15 Operation and Handing

This chapter provides you with important notices with regard to operating the device.

15.1 Operating elements and displays

The device transmits the following signal sounds as an acoustic feedback signal:
► Use the buttons " " and " " to set the temperature in the range of 8-18°C.
► Temperature recommendations: e.g. Red wine: 12°C – 16°C and e.g. white wine 8°C –
10°C.
You can set the temperature in C° and F° as you desire by pressing the "C°/F°" button.
You can set the temperature as your desire by pressing the buttons on the panel " " and
" " to adjust the temperature in 1°C steps from 8-18°C. You can tune the interior light on
or off by pressing the "Light" button.
The temperature in the device depends on the room temperature, the quantity of bottles
and the chosen temperature. Please note that your device is only intended to cool
beverages. The maximum temperature that can be reached inside the device cannot be
significantly ABOVE the ambient temperature at the setup location.
Warning
► The device can only cool efficiently if you regularly clean the fan mask. The device may
overheat if the fan mask is dirty. Depending on the degree of soiling the fan mask has to
be cleaned – at least once a month.

15.2 Rating plate

The rating plate with the connection and performance data can be founded on the back of
the device.

16 Cleaning and Maintenance

This chapter provides you with important notices with regard to cleaning and maintaining
the device. Please observe the notices to prevent damages due to cleaning the device
incorrectly and to ensure trouble-free operation.
Please note
28