Assembling And Adjusting The Adjustable Handle For; Cds ® Elbow Braces Extension L/L, M/M, S/S And Junior - Albrecht CDS EXTENSION Gebrauchsanweisung

CDS Elbow Brace Extension
®
User Instructions

2.1.3. Assembling and adjusting the adjustable handle for

CDS Elbow Braces Extension L/L, M/M, S/S and Junior
®
1
You can separate the forearm shell from the hinge rod by loosening the two
fixing screws.
2 Now place the handle's assembly rod between the hinge rod and forearm
shell.
3 After aligning the components, insert the longer fixing screws supplied with
the handle into the threaded holes in the hinge rod.
To adjust the length of the handle to the length of the arm, loosen the screws
by one turn each. Adjust the handle and tighten the screws again.
4
By loosening the knurled screw, you can adjust the angle of the handle
infinitely from 70° pronation to 70° supination. Fix it in the desired position
and tighten the knurled screw again.
1 1
3 3
36
1 1
4 4
2 2
4 4