Safety information
DANGER – RISK OF ELECTRIC SHOCK!
The egg boiler may only be connected to a properly installed
►
and earthed socket with a mains voltage of 220 – 240 V ∼,
50/60 Hz .
Always remove the plug from the power socket before moving
►
or filling the appliance, in the event of problems, before
cleaning the appliance and when the boiler is not in use!
Never pull on the mains cable ; always pull directly on the
plug itself . Never touch the appliance plug with wet or moist
hands .
Never immerse the appliance in water or any other liquids!
There is a risk of fatal electric shock if residual liquids come
into contact with live components during operation . Should
the appliance ever fall into liquid, IMMEDIATELY remove
the power plug from the socket . Please then contact the
Service Hotline (see section Service) .
Do not use the egg boiler if it is on a wet surface or if your
►
hands or the appliance are wet .
Position the mains cable
►
with hot or sharp-edged objects .
Use only easily accessible plug sockets so that you can unplug
►
the appliance quickly in the event of a malfunction .
Do not kink or crush the mains cable
►
around the appliance .
Do not operate the egg boiler if the appliance, the mains
►
cable
or the plug is damaged .
■
4
│ GB│IE
so that it does not come into contact
and do not wind it
SED 400 A1