Merax NS-901RE Gebrauchsanweisung Seite 25

Step 3
Attach the rear stabilizer (2) to back of the aluminum rail (9). Secure using four allen screws
(63) and four flat washers (45).
Pull out the lock pin (35) from the main frame. Insert the aluminum rail (9) into the back of the
main frame (1). Attach the bumpers (62) onto the each side of aluminum rail and secure by
two allen screws (61) and two washers (45). Then, secure using six allen screws (63) and six
flat washers (45).
Insert the lock pin into the joint of main frame and aluminum rail.
Step 4
Slide the saddle (12) onto the aluminum rail (9) from the back side.
Attach the bumpers (62) to the back of the aluminum rail (9). Secure using two allen screws
(61) and two washers (45),then attach the end caps (58&59) onto the rear of aluminum rail (9)
respectively.
Recheck all bolts and nuts are tightened securely
before using the machine.
5