Herunterladen Inhalt Inhalt Diese Seite drucken

Auto/Eco Mode; Checking The Charge Status Of The Battery; Working With The Device - Parkside PRMA 40-Li B3 Originalbetriebsanleitung

Akku-rasenmäher 40 v
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
of the guide groove on the open-
ing next to the battery and on
the ignition key (10) (see small
image
4. Before switching the apparatus
on, make sure that it is not touch-
ing any objects.
5. To switch the device on, press
the release button (16) and hold
it down while pulling the start
handle (17). Let go of the re-
lease button.
6. To switch the apparatus off, let
go of the starting lever (17).
Due to the intelligent energy man-
agement system, the motor starts
after a delay.
After switching off the equip-
ment, the blade continues to
turn for several seconds. Do
not touch the moving blade.
There is a risk of injury.

Auto/Eco mode

The cordless lawnmower automatically
launches in the last mode used when
turned on. You can switch between Auto
and Eco mode by pressing the Auto/Eco
switch button (20).
The illuminated auto/eco lamp indicates the
current mode of the cordless lawnmower.
Auto mode: the cordless lawn mower
adjusts the motor speed in
accordance with the load.
Eco mode:
the cordless lawn mower
runs at the lowest speed for
maximum battery life.
).
Checking the charge status
of the battery
The battery charge status indicator (
shows the state of charge of the battery
(
9).
Press the button for the charge level indica-
tor (
21) on the lower bar.
The charge level of the battery is indicated
by illumination of the corresponding LED
lights.
3 LEDs illuminated (red, orange and green):
Battery charged
2 LEDs illuminated (red and orange):
Battery partially charged
1 LED illuminated (red):
Battery needs to be charged

Working with the device

Observe noise protection rules and
other local regulations.
Regular mowing stimulates the grass to an
increased leaf formation, while at the same
time killing weeds. Therefore, the lawn be-
comes denser after each mowing process,
resulting in an evenly loadable lawn.
The first cut takes place roughly in April
when the grass is about 70 - 80 mm high.
During the main growing season, the lawn
is mowed at least once a week.
• Move the device at walking speed and
in lines which should be as straight as
possible. For a flawless mowing result,
the lines should always overlap by a
few centimetres.
GB
MT
22)
33

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis