Transport Damage - Unpacking And Inspection; Owner's Obligations - KULZER Translux Wave Gebrauchsanweisung

Symbols Accompanying word(s)
GB
- 4 -
2.2 Transport damage – Unpacking and inspection
The unit is sensitive to shock, because it contains electrical components. Particular care must therefore be taken during
transportation as well as storage. The equipment shipped by Kulzer was checked thoroughly prior to shipment. The unit
is correctly protected and packed when delivered.
Check the unit for damage after receiving it. If it is damaged, report this to the transportation company within 24 hours
of delivery. Under no circumstances, install or work with a damaged unit and / or accessories.
2.3

Owner's obligations

In addition to complying with the statutory regulations specified, the owner must ensure that statutory requirements
are observed and implemented in the workplace, i.e. he must train his personnel and comply with industrial safety
legislation and all further valid regulations or laws in force.
For work on and with the unit, written instructions in an understandable form and in the relevant language of the
respective employees must be provided by the owner using the operating instructions and on the basis of the work to
be carried out.
Explanation
Switching power supply plug polarity – Centre positive.
Use in closed spaces only.
Device manufactured in conformity with Regulation EU MDR 2017/745
including technical standards IEC 60601-1 and IEC 60601-1-2.
Medical Device
Serial number
Product Number
Date of manufacture
Manufacturer
Distributor
Symbol ISO 7010-W001
Generic warning symbol
Consult instructions for use.
CAUTION, consult accompanying documents.
Operating switch:
" STAND-BY ".
Keep away from rain.
Storage temperature limitation.
Storage humidity limitation.
Storage atmospheric pressure limitation.