Installation And Connection; 1-Wire ® Teds - HBM TEDS Montageanleitung

4

INSTALLATION AND CONNECTION

This section covers the wiring of the various TEDS modules and installation instructions
for D-SUB-HD15 3-row 15-pin and 2-row 15-pin plugs.
Notice
The TEDS module comprises electronic components. Follow the precautions to protect
electronic components against electrostatic discharge (wearing an ESD wrist strap) when
handling them. Use appropriate (lead-free) solder and a soldering iron suitable for elec­
tronic components.
®
4.1 1-Wire
The measuring amplifier must have a separate input for the 1-Wire
or earth is usually used as the second connection.
TEDS (+)
Fig. 2.1 View of the TEDS chip from below (solder side)
Read the operating manual for your measuring amplifier to find out the connectors to
which the chip must be connected.
TEDS
INSTALLATION AND CONNECTION
TEDS
2
1 ®
1-Wire TEDS
®
TEDS. Signal ground
7