Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7
Commissioning
Before commissioning, carry out the following checks:
▶
Check the device for damage.
▶
Check that mounting and installation have been performed correctly.
▶
Remove any entfernen.
▶
If necessary, clean the connection chamber.
▶
Check whether all the specified tightening torques have been observed.
8
Maintenance, Overhaul, Repair
▶
Observe the relevant national standards and regulations in the country of use,
e.g. IEC/EN 60079-14, IEC/EN 60079-17, IEC/EN 60079-19.
8.1
Maintenance
Check the following points in addition to the national regulations:
• Whether the clamping screws holding the electrical lines fit securely
• Whether the device has cracks or other visible signs of damage
• Whether the permissible temperatures are complied with
• Whether the parts are securely fitted
• Ensure it is being used as intended.
8.2
Overhaul
▶
Perform overhaul of the device according to the applicable national regulations and the
safety notes in these operating instructions ("Safety" chapter).
8.3
Repair
▶
Repair work on the device must be performed only by R. STAHL.
9
Returning the Device
▶
Only return or package the devices after consulting R. STAHL!
Contact the responsible representative from R. STAHL.
R. STAHL's customer service is available to handle returns if repair or service is required.
▶
Contact customer service personally.
or
▶
Go to the r-stahl.com website.
▶
Under "Support" > "RMA" > select "RMA-REQUEST".
▶
Fill out the form and send it.
You will automatically receive an RMA form via email.
Please print this file off.
▶
Send the device along with the RMA form in the packaging to
R. STAHL Schaltgeräte GmbH (refer to chapter 1.1 for the address).
149183 / 8560603300
2022-10-18·BA00·III·en·03
Fuse base
Series 8560
Commissioning
DE
EN
FR
IT
ES
RU
NL
DK
SE
FI
PT
GR
PL
CZ
SK
HU
SL
RO
BG
LV
LT
EE
CH
KR
CN
9
Werbung
Inhaltsverzeichnis
