Protecting Yourself And Others; Danger From Toxic Gases And Vapours - Fronius VR 1500-PAP Bedienungsanleitung

This may affect a number device types in terms of:
-
-
-
*)
at the interface with the public grid
see "Technical data"
In this case, the plant operator or the person using the device should check whether the
device may be connected, where appropriate by discussing the matter with the power
supply company.
IMPORTANT! Ensure that the mains connection is earthed properly
Protecting Anyone working with the device exposes themselves to numerous risks, e.g.
yourself and -
others -
-
-
-
-
Suitable protective clothing must be worn when working with the device. The protective
clothing must have the following properties:
-
-
-
-
-
Protective clothing refers to a variety of different items. Operators should:
-
-
-
-
-
Keep all persons, especially children, out of the working area while any devices are in
operation or welding is in progress. If, however, there are people in the vicinity:
-
-
-
Danger from to- The fumes produced during welding contain harmful gases and vapours.
xic gases and va-
Welding fumes contain substances that cause cancer, as stated in Monograph 118 of the
pours
International Agency for Research on Cancer.
Use at-source extraction and a room extraction system.
If necessary, use a welding torch with an integrated extraction device.
Keep your face away from welding fumes and gases.
Connection restrictions
Criteria with regard to the maximum permissible mains impedance
Criteria with regard to the minimum short-circuit power requirement
flying sparks and hot pieces of metal
Arc radiation, which can damage eyes and skin
Hazardous electromagnetic fields, which can endanger the lives of those using car-
diac pacemakers
Risk of electrocution from mains current and welding current
Greater noise pollution
Harmful welding fumes and gases
Flame-resistant
Insulating and dry
Covers the whole body, is undamaged and in good condition
Safety helmet
Trousers with no turn-ups
Protect eyes and face from UV rays, heat and sparks using a protective visor and
regulation filter
Wear regulation protective goggles with side protection behind the protective visor
Wear stout footwear that provides insulation even in wet conditions
Protect the hands with suitable gloves (electrically insulated and providing protection
against heat)
Wear ear protection to reduce the harmful effects of noise and to prevent injury
Make them aware of all the dangers (risk of dazzling by the arc, injury from flying
sparks, harmful welding fumes, noise, possible risks from mains current and welding
current, etc.)
Provide suitable protective equipment
Alternatively, erect suitable safety screens/curtains.
*)
*)
37