Use
Select operating mode
Function selector
♦
Press and hold the release button
function selector switch
selector switch
so that the required symbol
engages at the arrow mark:
Function
Drilling/screwing
Hammer drilling
Chiselling
Chisel position adjustment
Adjusting chisel position
You can rotate the tool to the required position for
chiselling using this function.
♦
Turn the function selector switch
position .
♦
Turn the tool in the tool holder
required position.
♦
Turn the function selector switch
position
for the chiselling function.
Switching on and off
Switching the appliance on
♦
Press the ON/OFF switch
Switching the device off
♦
Release the ON/OFF switch
Switching to continuous operation
♦
Press the ON/OFF switch
pressed position with the ON/OFF switch
lock button
.
Switching off continuous operation
♦
Press the ON/OFF switch
again.
PBH 800 A1
on the
. Turn the function
Symbol
to
to the
to
.
.
. Lock it in the
and release it
Adjusting the rotational speed
The ON/OFF switch
control. Pressing the ON/OFF switch
yields a low speed. Increasing pressure increases
the speed.
Changing the direction of rotation
♦
Change the direction of rotation by pressing the
rotation direction switch
right.
Maintenance and cleaning
WARNING! RISK OF INJURY! Switch
the appliance off and remove the
power plug before starting any work
on the appliance.
■
Never permit liquids to penetrate inside the
appliance.
■
Use a soft, dry cloth to clean the housing.
■
Clean the tool holder
CAUTION! PRELOADING!
♦
To do this, pull the locking collar
and pull the dust protector cap
of a screwdriver off the tool holder
WARNING!
►
If the power cord requires replacement, this
should be carried out by the manufacturer or
an approved representative to avoid safety
hazards.
NOTE
►
Replacement parts not listed (such as carbon
brushes, switches) can be ordered via our
service hotline.
has a variable speed
lightly
towards the left or
regularly:
backwards
with the help
.
GB │ MT
│
43
■