Herunterladen Inhalt Inhalt Diese Seite drucken

AERMEC SWP 301 Installation & Wartung Seite 49

Wärmepumpe für brauchwasser
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 90
PROGRAMMING
Used to access branches CFn, PUP, dFr,
Fan, ALL, EXV as indicated in the naviga-
tion diagram on pages 28 and 29.
Access to the programming function is sig-
nalled by the illumination of LED L12.
The path of each branch is cyclical - i.e. you
can pass from the last variable to the first
one and vice versa just by pressing the UP
and DOWN keys.
Within each branch, a long press on the
UP and DOWN keys quickly increases/de-
creases the variables shown.
Once the parameter to be changed has
been identified:
- press the SET key to see its value
- press the UP/ DOWN keys to modify its
value
- press the SET key again to confirm the
change and visualise the parameter.
From any point within the navigation dia-
gram, you can press and hold the SET key
to return to the display of the current wa-
ter temperature.
Warning:
An initialisation procedure must be per-
BRANCH OVERVIEW - DISPLAY STATE PA-
RAMETERS
Starting from the display of the current
water temperature, by pressing the SET
button, you can display only (no editing)
information about the machine status such
as temperature sensors, status inputs / out-
puts, and hours of operation (see CHART
NAVIGATION).
Access to this branch is indicated by the
rightmost point of the display switched on
constantly.
It wakes from display or by long pressing
the SET button or to the passage of a time
t = 60 sec since the last release of the UP,
DOWN or September
formed to restore the factory default val-
ues. To do this, start from STANDBY (the
point furthest to the right on the current
display) and press the UP and DOWN keys
simultaneously for 5 seconds. The mes-
sage "int" will appear on the screen to
confirm the initialisation.
The User branch parameters can be modi-
fied via the keyboard without entering a
password.
A password is required to access the Man-
ufacturer branch parameters (the entry
of the password starts from the number
000).
Exiting the programming mode is per-
formed or by pressing and holding the SET
button or after a time t = 60sec has passed
from the last release of the UP, DOWN or
SET key.
SUMMARY BRANCH - PARAMETER STATUS
DISPLAY
Starting from the display of the current
water temperature, when you press the
SET key you can only view (without modi-
fying) the machine status information
- e.g. probe temperatures, input/output
status, and operating hours (see NAVIGA-
TION DIAGRAM).
Access to this branch is indicated by the
rightmost point of the display constantly
on.
Display mode is quit by pressing and hold-
ing the SET key, or after a time t = 60sec
has elapsed since the last release of the
UP, DOWN or SET key.
SWP_5139100_04
49

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Swp 301s1Swp 301s2

Inhaltsverzeichnis