Symbols - VOLTCRAFT VC292 Bedienungsanleitung

Element
Auto
DC
AC

11.2 Symbols

Symbol Description
REL Relative measurement button (= reference measurement)
SELECT
Switch to sub-mode
HOLD
Freezes the current measurement
OL
Overload = The measurement range was exceeded
LEAd "Incorrect socket" warning
OFF
"Meter OFF" switch position
ON
"Meter ON" switch position
Diode test symbol
Acoustic continuity tester symbol
Capacity measurement range symbol
Alternating current symbol
70
Description
Correct socket assignment indicator
Automatic measurement range selection is enabled
Battery replacement indicator
Hold function is enabled
Direct current symbol ( )
Polarity indicator for current flow direction (negative terminal)
Alternating current symbol ( )
Warning symbol for dangerous voltage
Symbol for current measurement with current clamp