Functional Principle, Technical Data; Sensor Types - MICRO-EPSILON optoNCDT ILR 102 Serie Betriebsanleitung

Functional Principle, Technical Data

3. Functional Principle, Technical Data
3.1

Sensor Types

Fig.3.1: Front view
Fig.3.2: Front view
ILR1020/1021
ILR110x/115x
Fig.3.3: Rear view Fig.3.4: Rear view
ILR1020/1021 ILR110x/115x
The sensors of the series ILR102x/110x/115x use
the principle of pulsed light runtime measurement.
The sensors measure the distance to a target
(ILR1020/1100/1150) or a reflector (ILR1021/1101/1151).
The distance measuring is done with a infrared laser.
An additional red target laser is used for mounting and
adjustment purposes.
The measurements are provided with analog or digital
standard interfaces.
The series ILR102x sensors contain:
• 2 buttons for complete on-site setup
• Analog output, 4 .. 20 mA
• 2 switching outputs
The series ILR11xx sensors contain:
• LCD display and 3 buttons for complete on-site setup
• RS422 interface
• SSI compatible interface (GRAY or BIN, 24 or 25 bit)
• 2 switching outputs, error and plausibility output
• Bus communication with external bus adapter
• Analog output, 4 .. 20 mA, (ILR11x0 only)
Page 51