Herunterladen Inhalt Inhalt Diese Seite drucken

Lubricating Oil For Refrigerating Compressors In Systems With An Add On Heat Pump; Vorschmierungsölsystem - GEA Grasso V Serie Installations- Und Wartungsanleitung

Hubkolbenverdichter für die industrielle kühlung
Inhaltsverzeichnis

Werbung

Accepted NH
PETRO CANADA
Kuwait Petroleum
4.6.3
Lubricating Oil for Refrigerating Compressors in systems with an add on Heat
Pump
For an add on Heat Pump
also be applied to the refrigeration compressor(s) providing:
Strongly Recommended Oil Type
PR-OLEO® C-MH100A-FG
4.7
Vorschmierungsölsystem
Warum vorschmieren?
Die Vorschmierung ist in den unten aufgeführten Situationen notwendig, um aus-
reichend Schmieröl an den Stellen bereitzustellen, wo es am meisten benötigt
wird (Ölpumpe, Lager, Kolben und Kolbenringe), um sicherzustellen, dass die
Gefahr des „Trockenlaufens" minimiert oder sogar beseitigt wird. Das Trocken-
laufen von Ölpumpen, Lagern, Kolben und Kolbenringen führt zum Verschleiß
bzw. verstärkt den Verschleiß der genannten Teile und wird schließlich die Kur-
belwelle und die Zylinderbuchsen beschädigen.
23
24
0089388_imm_v_german_~_20
26.07.2021
oil types for Grasso reciprocating compressors
3
Brand
Klüber
SHELL
SUN-OIL
TEXACO
TOTAL
An oil cooler is present to ensure the oil temperature stays within normal ope-
rating limits (refer to paragraph 2.8 "Air Cooled Oil Cooler" in the Product
Information)
A minimum oil temperature of +30°C is achieved before start-up
The minimum allowable evaporating temperature is considered to ensure
adequate oil recovery from the evaporator(s). The minimum recommendation
is -20°C/R717
Viscosity grade number designation according to ISO Standard 3448.
An add on Heat Pump is where discharge gas from the refrigeration compressor(s) enters
directly into the suction side of the heat pump compressor(s). In this case a common oil for
both the refrigeration and heat pump compressors may be advantageous.
Type designation
Reflo 68A
Reflo XL
Summit RHT-68
Q8 Stravinsky C
Refrigeration Oil S2 FR-A
Suniso 3.5 GS
Suniso 4 GS
Suniso 5 G
Suniso 4 SA
Capella WF 68
Capella Premium 68
Luneria FR 68
24
where an ISO VG 100 oil is mandatory, the oil may
ANHANG; Produktinformationen (PI)
Vorschmierungsölsystem
ISO VG num-
Food Grade
23
ber *
58
68
55
68
43
55
94
57
65
67
68
H2
H2
H2
-
-
-
-
-
-
H2
-
-
63

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis