Package contents
1 cordless impact drill
2 battery packs
1 high-speed charger
1 additional handle
1 cutter knife (incl. 8 spare blades)
1 ratchet screwdriver (1/4")
1 screwdriver (1/4")
72 bits
2 bit holders
1 measuring tape
6 wood drill bits
6 metal drill bits
6 concrete drill bits
1 depth stop
1 carrying case
1 set of operating instructions
Technical data
Cordless impact drill PSBSAP 20-Li B2
Rated voltage
Gears
Rated idle speed
Stroke frequency
Max. torque
Torque levels
Chuck capacity
Max. drill diameter
Battery PAP 20 B1
Type
Rated voltage
Capacity
Cells
PSBSAP 20-Li B2
20 V
(DC)
2-speed gearbox
1st gear: n
0–400 rpm
0
2nd gear: n
0–2000 rpm
0
1st gear: n
0–7200 rpm
0
2nd gear: n
0–36000 rpm
0
80 Nm
1–21 + 1 drill setting/
+ 1 hammer setting
max. Ø 13 mm
65 mm for wood
16 mm concrete
(without stones)
13 mm for steel
LITHIUM ION
20 V
(DC)
2 Ah
5
High-speed charger PLG 20 C2
INPUT
Rated voltage
Rated power
consumption
Fuse (internal)
OUTPUT
Rated voltage
Rated current
Charging time
Protection class
Noise emission value
Noise measurement value determined in accordance
with EN 62841. The A-rated noise level of the power
tool is typically:
Sound pressure level
Uncertainty K
Sound power level
Uncertainty K
Vibration emission value
Total vibration values (vector total of three direc-
tions) determined in accordance with EN 62841:
Impact drilling in concrete
Uncertainty
Wear ear muffs!
NOTE
►
The vibration emission values and the noise
emission values given in these instructions
have been measured in accordance with
a standardised test procedure and can be
used for comparison of the power tool with
another tool.
►
The specified total vibration values and the
noise emission values can also be used to
make a provisional load estimate.
230–240 V ∼, 50 Hz
(AC)
85 W
T3.15A
3.15 A
21.5 V
(DC)
3.5 A
approx. 45 min
II /
(double insulation)
L
= 89 dB (A)
PA
K
= 5 dB
PA
L
= 100 dB (A)
WA
K
= 5 dB
WA
a
= 6.1 m/s
,ID
H
K = 1.5 m/s
GB │ MT
│
51
2
2
■