Introduction; Intended Use; Depicted Components; Package Contents - Parkside PBH 1050 C3 Originalbetriebsanleitung

HAMMER DRILL PBH 1050 C3

Introduction

Congratulations on the purchase of your new
appliance . You have chosen a high-quality product .
The operating instructions are part of this product .
They contain important information about safety,
usage and disposal . Before using the product,
please familiarise yourself with all operating and
safety instructions . Use the product only as de-
scribed and for the range of applications specified .
Please also pass these operating instructions on to
any future owner .

Intended use

The hammer drill and power chisel (hereinafter
referred to as appliance) is suitable for:
▯ Hammer-drilling into brickwork, concrete and
stone
▯ Chiselling into concrete, stone and plaster
▯ Drilling into stone, wood and metal
Any other usage or modification of the appliance
is deemed to be improper and carries a significant
risk of accidents .
The manufacturer accepts no responsibility for
damage(s) attributable to misuse . The appliance is
not intended for commercial use .

Depicted components

Locking button for the depth stop
Clockwise/anticlockwise switch
ON/OFF switch
Speed preselector wheel
Locking button for ON/OFF switch
LED
Function selector
Release button for function selector switch
Additional handle
Dust protection cap
Tool holder
Locking collar
Depth stop (not prefitted)
Quick-release chuck
■ 2 │ GB │ IE │ NI │ CY

Package contents

1 hammer drill
1 additional handle
1 quick-release chuck with SDS plus system tool
fitting (see fig . A)
3 SDS drills (6/8/10 x 150 mm, see fig . B)
1 flat chisel (14 x 250 mm, see fig . B)
1 pointed chisel (14 x 250 mm, see fig . B)
1 depth stop
50 g special grease for lubricating the drill chuck
1 carrying case
1 set of operating instructions

Technical data

Rated power consumption
Rated voltage
Rated idling speed
Stroke rate
Impact energy
Max . drill diameter
Diameter drill chuck
Protection class
Meaning
Concrete
Masonry
Steel
Wood
Core cutter
1050 W
230 V ∼, 50 Hz (AC)
n 0–980 rpm
0
0–5300 bpm
3 J
13 mm for steel
32 mm for wood
26 mm for concrete
2 – 13 mm
II /
(double insulation)
Symbol
PBH 1050 C3