ECOLAB LMIT09 DPV1 Betriebsanleitung Seite 199

Operation
Only Alarm Log (delete alarm log)
Fig. 51: Service – Factory Defaults – Only Alarm Log
1. Select the menu (
ð Factory defaults is called and Only Settings (item 1) is displayed in grey
(inverted).
2. Press the 'Down'
ð The Only Alarm Log submenu (item 3) is displayed in grey (inverted).
3.
Press the 'Enter'
ð The screen displays a confirmation prompt, which is set to NO by default (item 5)
to prevent data from being deleted accidentally.
4. Use the arrow buttons (item 6) to switch between No (item 5) and Yes (item 7).
5.
Use the
ð
The screen returns to the factory defaults, as described under
Manual Functions - Factory defaults' on page 85.
417101561 Rev. 4-06.2021
1
2
Ä 8.8 'Service' on page 83).
button (item 2).
button (item 4) to call the Only Alarm Log selection screen.
button (item 8) to confirm the required setting.
Choosing Yes (item 5) deletes the data.
3
4 8
86
7
5
6
Ä 'Calling