ECOLAB LMIT09 DPV1 Betriebsanleitung Seite 186

Measuring Mode - Concentration
1. If you have selected Concentration as described under
on page 61, press the
LMIT09 DPV1.
2. Press the 'Right'
products, then use the 'Up'
and press to confirm.
3. The display will then return to 'Product'. Use the 'Down'
setting range for the Current Output.
4.
Press the 'Right'
button to adjust the first digit.
5.
Then use the 'Right'
these using the
6.
Press the 'Right'
button to set the first digit. Then use the 'Right'
the decimal point and set these using the
7. Press the button to complete the setting and return to the Parameter Menu.
button to access a selection of the products defined in
arrow button to access the screen where you can select the
or 'Down'
button to go to the NULL setting, then use the
button to switch to the digits after the decimal point and set
or button.
button to access the SPAN setting, then use the
73
Ä 8.6 'Parameters'
arrow buttons to make your selection
button to access the
button to switch to the digits after
or button.
417101561 Rev. 4-06.2021
Operation
or
or