ECOLAB LMIT09 DPV1 Betriebsanleitung Seite 163

Operation
Overview of Basic Settings
Fig. 14: Overview - Basic Settings
G Basic settings
1 Ä '- Language (operator and alarm
language)' on page 50
2 Ä 'Date/Time (Setting the date)' on page 51
3 Ä 'Access Code (entry of a 4-digit access
code)' on page 53
Ä 'Current Output Cond. (0 or 4 mA...20 mA,
4
measured value stability & alarm level)' on page 54
Ä 'Current Output Temp. (0 or 4 mA...20 mA,
5
measured value stability & alarm level)' on page 56
- Language (operator and alarm language)
Fig. 15: Operator and alarm language
1. Call the main menu (item A) and open Basic Settings (item B)
(see Ä 8.4 'Main menu' on page 46).
ð The Basic Settings menu is displayed.
2.
Press the 'Enter'
ð The available languages are displayed for selection.
3. Press the buttons: Use the 'Up'
(item 4) arrow buttons to select the required language.
4. Use the
ð The menu switches to this language and the display returns to the Basic
Settings menu (see
The following languages are available:
English, French, German (factory setting), Italian, Dutch, Spanish
417101561 Rev. 4-06.2021
G
A
button (item 1) to call the Language submenu (item C).
button (item 5) to confirm the selected language.
Ä 8.5 'Basic settings' on page 49).
G
1
2
3
4
5
6
7
8
9
10
Ä 'CIP Functions OFF, Signal A (CIP 1/2)) only,
6
Signal A&B (CIP 1- 4)' on page 57
7 Ä 'Alarm Relay (Response in the event of an alarm
(inactive or active))' on page 58
8 Ä 'Reference Temperature (0°C, 20°C, 25°C or
manual entry)' on page 59
Ä 'Temperature Unit (Celsius or
9
Fahrenheit)' on page 60
Ä 'Unit Number (entry of an 8-digit, individual unit
10
number)' on page 61
B
1
5
(item 2), 'Down'
50
C
3
2 4
(item 3) or 'Right'