Voltage; Initiation And Operation - GFL 3031 Bedienungsanleitung

3031 Schüttelinkubator
Shaking Incubator

4. Voltage

The main switch on the control panel of the Shaking Incubator must be in position 0.
The voltage and frequency on the nameplate (at the back of the unit) must be identical
to the mains voltage and mains frequency.
If they are identical, connect the unit to the mains, i.e. plug the unit's shock-proof plug into a
socket.

5. Initiation and Operation

The Shaking Incubator must only be connected to a properly
installed power connection with neuter (PE),
according to the local regulations.
It must be secured that power can be cut all-pole
due to high risk of injuries, never reach into the unit
make sure that neither the shaking movement nor the
heating process create an explosive atmosphere
near the Shaking Incubator during operation.
in the Incubator's interior temperatures can rise
up to 70°C during operation.
After switching on the main switch 1 the fan motor starts.
Incubation time, incubation temperature and shaking frequency
must be activated and set individually. The shaking motion can
only be operated when the lid is closed and will be cut off when
the lid is opened.
Please refer to the following pages for instruc-tions on initiation of
the individual functions.
Seite / Page 15 Rev.02 vom / dated 31.03.2014
(switch or socket).
Caution,
during operation.
Caution,
Caution,
Danger of burns !