Before First-Time Use; Assembly And Installation; Charging The Battery; Switching The Cordless Magnetic - LIVARNO LUX 970-M Bedienungs- Und Sicherheitshinweise

incorrectly, there is a risk of explosion or of
skin burns from escaping battery fluid.
Never throw rechargeable batteries on a
„
fire. They may explode or cause toxic
fumes�
Do not expose rechargeable batteries to
„
unlimited amounts of sunlight or heat�
Do not take rechargeable batteries apart or
„
short-circuit them�
Charge the battery at normal room
„
temperature (approx� 20 °C)�
Use only an SELV mains adaptor for
„
charging�
z Before first-time use
Check that all package contents are present�
Inspect the cordless magnetic lamps
the USB charging cable
external damage. If you find any signs of
damage, do not use the cordless magnetic
lamps� Please contact Customer Service at
the address indicated�
Unpack all parts of the product� Remove the
packaging material� Keep the packaging in
a safe place out of the reach of children�
There is a risk of suffocation if children are
allowed to play with packaging material�
z Assembly and installation
Please note: Dispose of all packaging
material�
Take the magnetic holder with the adhesive
pad and pull off the protective strip (see
8
Fig� C)� Now stick the magnetic holder in the
desired position� To ensure good adhesion,
make sure the surface is flat, dry and free of
grease� Fix the cordless magnetic
the magnetic holder
integrated magnet
4
E)�
Please note: Removing the adhesive pad
may cause damage to the surface in some
cases� We can accept no liability for such
damage� When the battery needs to be
8
GB
and
1
for any signs of
9
lamp to
1
with the aid of the
8
in the casing (see Fig�
recharged, the magnetic lamp can simply be
removed from the magnetic holder
Fig� E)�
z Charging the battery
Risk of electric shock!
The cordless magnetic lamps
be recharged in dry indoor areas using an
SELV mains adaptor� Before using the
cordless magnetic lamps
please fully charge the battery� To do so, use
the USB charging cable supplied
Fig� D)�
Plug the USB charging cable supplied
„
into the micro-USB socket
magnetic lamp (see Fig� F)�
To charge the lamp, connect the USB
„
charging cable
9
(5 VDC, max� 0�22 A)�
Plug the USB mains adaptor into a power
„
outlet socket�
The charging time is approx� 2-3 hours� The
charge indicator
6
cordless magnetic lamp is fully charged� As
soon as the cordless magnetic lamp
fully charged, the charge indicator [6] shows
green� You can then unplug the USB mains
adaptor from the power outlet socket and
disconnect the USB charging cable
the cordless magnetic lamp
z Switching the cordless
magnetic lamps ON/OFF
The cordless magnetic lamps can be
„
switched on or off using the ON/OFF/
AUTO switch �
3
The cordless magnetic lamps have two
„
functions: permanently on, and
automatically on for 120 seconds� For the
permanently on function, slide the ON/
OFF/AUTO switch
lamp to the ON position� For the light to
come on automatically when the cupboard
door is opened, slide the ON/OFF/AUTO
(see
8
should only
1
for the first time,
1
(see
9
9
on the
5
to a USB mains adaptor
remains red until the
is
1
from
9
(see Fig� F)�
1
on the side of the
3