Herunterladen Inhalt Inhalt Diese Seite drucken

Basic Safety Instructions - Abicor Binzel xFUME POWER 250 Originalbetriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

xFUME POWER 250

2.4 Basic safety instructions

The product has been developed and manufactured in accordance with state-of-the-art technology and the
recognized safety standards and regulations. The product can present design-related, unavoidable risks for
users, third parties, or other material property. The manufacturer will accept no liability for damage caused
by non-observance of the documentation.
► Please read the documentation carefully before using the product for the first time and comply with the
instructions contained in it.
► Only operate the product in technically perfect condition in compliance with all documentation.
► Before carrying out specific work, for example commissioning, operation, transport and maintenance,
read the documentation carefully.
► Use suitable means to protect yourself and bystanders from the hazards listed in the documentation.
► Store the documentation within easy reach of the device for reference and enclose all documentation
when passing on the product.
► Consult the documentation for the other welding components.
► When handling gas cylinders, consult the instructions from the gas manufacturers and the
corresponding local regulations, e.g. pressurised gas regulations.
► Observe the local accident prevention regulations.
► Have commissioning as well as operating and maintenance work carried out exclusively by qualified
personnel. Qualified personnel are persons who, based on their special training, knowledge,
experience and due to their knowledge of the relevant standards, are able to assess the tasks assigned
to them and identify possible dangers.
► Ensure the work area is well lit and keep it in good order.
► For the entire duration of servicing, maintenance and repair work, switch off the power source, and the
gas and compressed air supply, and disconnect the mains plug.
► For disposal, observe the local regulations, laws, provisions, standards and guidelines.
Electro-technical safety instructions
► Check electric tools for damage and for their proper functioning in accordance with their designated
use.
► Do not expose electric tools to rain and avoid a moist or wet environment.
► Protect yourself from electric shock by using insulating mats and wearing dry clothing.
► Do not use the electric tools in areas subject to fire or explosion hazards.
Welding safety instructions
► Arc welding may cause damage to the eyes, skin and hearing. Please note that other hazards may
occur in connection with other welding components. Therefore, always wear the required safety
clothing in compliance with local regulations.
► Any metal vapours, especially lead, cadmium, copper and beryllium are harmful! Ensure sufficient
ventilation or extraction. Do not exceed the current occupational exposure limits (OEL).
► In order to prevent phosgene gas formation, rinse workpieces that have been degreased with
chlorinated solvents using clean water. Do not place degreasing baths containing chlorine in the vicinity
of the welding area.
► Adhere to the general fire protection regulations and remove flammable materials from the vicinity of
the welding work area prior to starting work. Provide appropriate fire extinguishing equipment in the
workplace.
Safety instructions regarding protective clothing
► Do not wear loose fitting clothing or jewelry.
► Use a hair net for long hair.
► Wear safety goggles, protective gloves and, if necessary, a respiratory mask.
2 Safety
EN - 9

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis