Meec tools 019199 Bedienungsanleitung Seite 47

SAFETY INSTRUCTIONS FOR BELT SANDERS AND
DRUM SANDERS
• Hold the tool by the insulated grips when working in areas
where the belt could come into contact with concealed
cables or the power cord. Contact with a live cable will cause
the metal parts on the power tool to also become live – risk
of electric shock.
MINIMISATION OF NOISE AND VIBRATION
• Plan the work so that exposure to heavy vibrations is spread
over a longer period.
• To reduce noise and vibrations when in use, limit the time
the tool is in use, and use low-power/vibration mode and
suitable safety equipment.
• Take the following precautions to minimise the risks of
exposure to vibrations and/or noise:
– Only use the tool in accordance with these instructions.
– Check that the tool is in good condition.
– Use accessories in good condition, and which are
suitable for the purpose.
– Keep a firm grip on the handles/grips.
– Maintain and lubricate the tool in accordance with
these instructions.
EN
47