Technical Data; Safety Instructions; Symbols And Icons - Parkside PSSSA 20-Li B2 Originalbetriebsanleitung

Technical data

Cordless Jigsaw &
Sabre Saw 20V .......PSSSA 20-Li B2
Nominal input voltage ................. 20 V
Idle speed n .................800 - 3000 min
0
Saw stroke .................................. 20 mm
Cutting depth in wood
Cordless Jigsaw ................ max. 50 mm
Cordless sabre saw ......... max. 100 mm
Cutting depth in metal
Cordless Jigsaw .................. max. 4 mm
Cordless sabre saw ........... max. 50 mm
Weight .................................. ca. 1.7 kg
Sound pressure level
(L ) ................... 84.3 dB(A), K
pA
Sound power level
(L ) .................95.3 dB(A), K
WA
Vibration (a ) 2
h
Cordless Jigsaw
in wood a .... 9.21 m/s
h,B
in metal a .. 10.36 m/s
h,M
Cordless sabre saw
in wood a .... 8,68 m/s
h,B
in wooden beam
a ............... 7.79 m/s
h,WB
Temperature.......................... max. 50 °C
Charging process ...................4 - 40 °C
Operation .......................... -20 - 50 °C
Storage .................................0 - 45 °C
Attention! An up-to-date list
of battery compatibility can
be found at:
www.lidl.de/akku
Levels of noise and vibration were determi-
ned according to the standards and regula-
tions in the declaration of conformity.
The specified total vibration value and the
stated noise emission value have been
measured according to a standardised test
method and can be used to compare one
-1
= 5 dB
pA
= 5 dB
WA
; K= 1.5 m/s
2 2
2 ; K= 1.5 m/s 2
; K= 1.5 m/s
2 2
2 ; K= 1.5 m/s 2
power tool with another.
The specified total vibration value and the
stated specified noise emission value can
also be used for a provisional assessment of
the load.
Warning:
The vibration and noise emissions
may deviate from the specified values
during actual use of the power tool, depen-
ding on how the power tool is being used
and, in particular, what kind of material is
being worked on.
Safety measures for the protection of
the operator are to be determined that
are based on an estimate of the actual
vibration load under the real operating
conditions (for this, all parts of the opera-
ting cycle are to be taken into account, for
example, times in which the electric tool is
turned off, and those during which it is tur-
ned on but running without a load).

Safety instructions

Ensure that the safety instructions are
observed when operating the trimmer.

Symbols and icons

Symbols on the device:
The device is part of the
Parkside X 20 V TEAM series.
CAUTION!
Read the instruction manual
Wear hearing protection
Wear safety goggles
Wear a respiratory mask
GB IE
23